|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Welcome to the DIY Helmet Lock Relocation
Welcome to the DIY
Helmet lock relocation.
This is the way I relocated SindyBelle's HL after I put the saddle bags and back
rest on her.
Basically I cut the two existing screws down with a cutoff wheel, cleaned the
threads,
Ground the tab on the lock off, Used Double sided
Automotive trim tape on the back (Not needed, but I always go over kill.)
Loctite (Red formula) the two screws and tighten them!. Pictures are a bit poor,
but you'll get the idea.
Click on the thumbnail for full sized picture, use your back button to
return to this page..
This is easy to do, free and unobtrusive
in addition to being very easy to access.
|
|
|
|
|
|
|
|
|
|
|
|
Back to DIY Page or Home
